Volvo MID136 User Manual (2024)

Volvo MID136 User Manual (1)

MID 136 - Volvo brake system fault codes

Volvo trucks PDF manuals

Volvo SID Fault Codes

Fault number.

Designation of malfunction.

FMI

Fault description.

SID 1, 2, 3, 4, 5, 6

Check the drawbar hitch

mechanism.

Data checksum is calculated correctly, but the tabular

values below standards.

Data checksum cannot be calculated or is incorrect,

because the interrupt signal.

High voltage on the contacts of the electronic unit

ABS. short circuit on the battery voltage, or electrical

1

circuit with a higher voltage.

2

Low voltage contacts electronic unit ABS. Low

3

voltage circuit, a short circuit on the circuit with a

4

lower voltage.

5

Low current on contact electronic unit ABS power

cable Breakage.

6

SID 1, 2, 3, 4, 5, 6

Car wheel speed sensor.

7

High current on contact electronic unit ABS. short

8

circuit on the weight.

9

Car wheel speed sensor. the system does not react

10

in the right way.

11

Abnormal pace data. Value (frequency, width or

period) pulse-width modulation is incorrect.

12

The pace and frequency of data updates, are wrong.

The place has a mechanical or electrical malfunction

the wheel speed sensor. Too large fluctuations.

Calibrating speed sensor car wheels. Damaged or

defective wiring component itself.

The place has a mechanical failure of the

component.

1

Data checksum is calculated correctly, but the tabular

values below standards.

Control valve solenoid

3

High voltage on the contacts of the electronic unit

ABS. short circuit on the battery voltage, or electrical

SID 7, 8, 9, 10, 11

valve, regulating the

circuit with a higher voltage.

braking system of the

5

vehicle.

6

Low current on contact electronic unit ABS power

cable Breakage.

Volvo MID136 User Manual (2)

High current on contact electronic unit ABS. short

circuit on the weight.

Data checksum is calculated correctly, but the values

above the norm.

Data checksum is calculated correctly, but the tabular

values below standards.

Data checksum cannot be calculated or is incorrect,

because the interrupt signal.

High voltage on the contacts of the electronic unit

ABS. short circuit on the battery voltage, or electrical

1

circuit with a higher voltage.

2

Low voltage contacts electronic unit ABS. Low

3

voltage circuit, a short circuit on the circuit with a

4

lower voltage.

5

Low current on contact electronic unit ABS power

cable Breakage.

6

SID 7, 8, 9, 10, 11,

Modulator car braking

7

High current on contact electronic unit ABS. short

12

system.

circuit on the weight.

8

9

Modulator, the system does not react in the right

10

way.

11

Abnormal pace data. Value (frequency, width or

period) pulse-width modulation is incorrect.

12

The pace and frequency of data updates, are wrong.

13

The place has a mechanical or electrical malfunction

of the modulator. Too large fluctuations.

14

Calibration of the modulator. Damaged or defective

wiring component itself.

The place has a mechanical failure of the

component.

Modulator, calibration values are wrong.

Modulator, special instructions.

SID 7, 8, 9, 10, 11,

Modulator valves car

12, 19

braking system.

High voltage on the contacts of the electronic unit

ABS. short circuit on the battery voltage, or electrical

3

circuit with a higher voltage.

SID 13

Cliff brakes emergency

5

Low current on contact electronic unit ABS power

cable Breakage.

brake of the car.

6

High current on contact electronic unit ABS. short

circuit on the weight.

SID 13

Electromagnetic retarder

relay car.

SID 14

Power supply traction-

control system of the car.

High voltage on the contacts of the electronic unit

ABS. short circuit on the battery voltage, or electrical

circuit with a higher voltage.

3

Low voltage contacts electronic unit ABS. Low

4

voltage circuit, a short circuit on the circuit with a

Solenoid valve power

lower voltage.

SID 14

supply traction-control

5

system of the car.

Low current on contact electronic unit ABS power

6

cable Breakage.

High current on contact electronic unit ABS. short

circuit on the weight.

SID 14.15

Check the control unit

traction-control system.

High voltage on the contacts of the electronic unit

ABS. short circuit on the battery voltage, or electrical

3

circuit with a higher voltage.

Low voltage contacts electronic unit ABS. Low

4

voltage circuit, a short circuit on the circuit with a

lower voltage.

Solenoid valve power

SID 15

supply traction-control

5

Low current on contact electronic unit ABS power

system of the car.

cable Breakage.

6

High current on contact electronic unit ABS. short

circuit on the weight.

SID 15

Power supply traction-

control system of the car.

System fault codes ABS

Data trouble codes do not impair the functionality of

SID 18.19

block in your program

the traction-control system, which continues to

vehicle.

operate as usual.

SID 22

Data from the wheel speed

14

Sensor data the rotational speed of the wheels,

sensors on the vehicle.

special instructions.

Signal light acceleration

Low current on contact electronic unit ABS power

SID 23

slip regulation system of

5

cable Breakage.

the car.

High voltage on the contacts of the electronic unit

3

ABS. short circuit on the battery voltage, or electrical

circuit with a higher voltage.

Signal light traction control

SID 24

Low voltage contacts electronic unit ABS. Low

system (TCS).

4

voltage circuit, a short circuit on the circuit with a

lower voltage.

SID 57.60

Comparison between pairs

of modulators.

Data checksum is calculated correctly, but the values

above the norm.

Data checksum cannot be calculated or is incorrect,

due to interruption of the signal.

2

High voltage on the contacts of the electronic unit

3

ABS. short circuit on the battery voltage, or electrical

SID 66

Car hitch modulator.

circuit with a higher voltage.

4

Low voltage contacts electronic unit ABS. Low

voltage circuit, a short circuit on the circuit with a

6

lower voltage.

High current on contact electronic unit ABS. short

circuit on the weight.

Data checksum is calculated correctly, but the values

above the norm.

Data checksum is calculated correctly, but the tabular

values below standards.

1

Modulator, the system does not react in the right

7

way.

Data from pressure sensor,

SID 67

modulator car hitch.

8

Abnormal pace data. Value (frequency, width or

12

period) pulse-width modulation is incorrect.

14

The place has a mechanical failure of the

component.

Pressure sensor special instructions.

Data checksum is calculated correctly, but the tabular

values below standards.

1

High voltage on the contacts of the electronic unit

ABS. short circuit on the battery voltage, or electrical

3

circuit with a higher voltage.

SID 68

Power supply modulator

car hitch.

4

Low voltage contacts electronic unit ABS. Low

voltage circuit, a short circuit on the circuit with a

7

lower voltage.

Power modulator system does not react in the right

way.

SID 69

The indication of the load

on the axle of the car.

SID 70, 71, 72, 73,

Indication of wear on brake

74, 75

system of a vehicle.

Data checksum cannot be calculated or is incorrect,

due to interruption of the signal.

2

High voltage on the contacts of the electronic unit

ABS. short circuit on the battery voltage, or electrical

3

circuit with a higher voltage.

4

Low voltage contacts electronic unit ABS. Low

SID 76

Foot valve brake in the

voltage circuit, a short circuit on the circuit with a

brake system of the car.

lower voltage.

12

The place has a mechanical failure of the

14

component.

Foot brake valve, special instructions.

The data in the EEPROME

SID 79

of the electronic control

unit of the braking system

of the vehicle, tire size.

High voltage on the contacts of the electronic unit

Internal indication of supply

3

ABS. short circuit on the battery voltage, or electrical

circuit with a higher voltage.

voltage in the block of the

SID 221

Low voltage contacts electronic unit ABS. Low

braking system of the

4

voltage circuit, a short circuit on the circuit with a

vehicle.

lower voltage.

2

Data checksum cannot be calculated or is incorrect,

because the interrupt signal.

SID 231

The control channel data

5

SAE J1939 car.

Low current on contact electronic unit ABS power

6

cable Breakage.

Volvo MID136 User Manual (2024)
Top Articles
Latest Posts
Article information

Author: Amb. Frankie Simonis

Last Updated:

Views: 5540

Rating: 4.6 / 5 (76 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Amb. Frankie Simonis

Birthday: 1998-02-19

Address: 64841 Delmar Isle, North Wiley, OR 74073

Phone: +17844167847676

Job: Forward IT Agent

Hobby: LARPing, Kitesurfing, Sewing, Digital arts, Sand art, Gardening, Dance

Introduction: My name is Amb. Frankie Simonis, I am a hilarious, enchanting, energetic, cooperative, innocent, cute, joyous person who loves writing and wants to share my knowledge and understanding with you.